•
VoiceAlert
2
User Manual
•
Press
OK
•
Speak into microphone to record next message segment.
•
Press
OK
•
Continue as above until all 12 segments have been recorded.
•
Press
Return
to exit
Hint:
If you are not happy with one of the recordings (may be distorted or too soft), or if you want to change a
message, then you can do this quickly by using the specific key segment for that message (no need to re-
record all messages). For example, if you wish to adjust or change message for recorded segment 4, then
proceed as below:
•
Press
Return
•
Press
PRG
•
Enter
40
•
Press
OK
•
Enter
03
(this is the key code for segment 4)
•
Press
OK
•
Record New Message
•
Press
OK
•
Press Return
Related configuration codes
(You may need to set the following related configurations):
•
41-42
Code 41 – Listen to Single Recorded Message Segment
Prerequisite for basic VA
2
operation:
NO.
Reason for Configuration:
This function provides a quick method for listening to a single recorded voice
segment. Message is played back over the built-in speaker.
Background info:
This is useful it allows you to check the quality of a recorded voice segment and decide if
need to improve the recording quality or message content. If you have forgotten exactly which segment a
specific voice message was recorded into but you have a general idea, then Code 41 allows you to check if
you are correct (important to know this when adding zones to message and when coding wireless sensors
onto VA
2
). Alternatively,
use Code 42 to listen to all messages.
Function Options:
1. For retrieving and listening to one recorded voice segment at a time.
Procedure
(e.g. to listen to recorded segment 8 (i.e. key=07)
:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
41
•
Press
OK
•
Enter
07
•
Press
OK
Copyright InFocus Trading 111 cc, 2009
35
