Winway FARMBOSS II Скачать руководство пользователя

Страница: 51 / 67





MAINTENANCE

Continuously Variable Transmission (CVT) System

CVT Drying

There may be some instances when water is accidently ingested into the CVT system. Use the following

instructions to dry it out before operating.

NOTICE:

Do not attempt to start the engine if water is present in the air box.

1. Position the vehicle on a level surface.

2. Apply the brakes. Start the engine.

3. Engage the park brake. Shift the transmission to neutral.

4. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. Do not hold the

throttle wide open for more than 10 seconds.

5. Allow the engine RPM to settle to idle speed. Apply the service brakes. Release the park brake and shift the

transmission to the lowest available range.

6. Test for belt slippage. If the belt slips, repeat the process.

7. Take the vehicle to your dealer for service as soon as possible.

Vehicle Immersion

NOTICE:

If your vehicle becomes immersed, major engine damage can result if the machine is not

thoroughly inspected. Take the vehicle to your dealer before starting the engine.

If it's impossible to take your

FARMBOSS

to a dealer before starting it, follow the steps outlined

below.

1. Move the vehicle to dry land or at the very least, to water below the floorboards.

2. Inspect the air box for water.

NOTICE:

Do not attempt to start the engine if water is present in the air box. Engine damage will result.

Take the vehicle to your dealer before starting the engine.

3. If the air box is wet but has no visible water, dry the air box.

4. Thoroughly dry the air pre-cleaner mounted on the main frame of cage.

5. Take the vehicle to your dealer for service as soon as possible, whether you succeed in starting it or not.

6. If water has been ingested into the CVT follow the procedure above for drying.

Содержание FARMBOSS II




































































Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды

Winway FARMBOSS II, Руководство пользователя

Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды