Winway FARMBOSS II Скачать руководство пользователя

Страница: 42 / 67





under severe use, such as wet or dusty conditions. Items not listed in the chart should be lubricated at the general

lubrication interval.

Item

Grade

Capacity

Engine oil

15W/30 or 15W/40

4.8L

(5.0736qt)

Gearbox oil

GL-4 85W/90

550ML(0.582qt)

Front & rear Differential oil

GL-4 85W/90

400ML(0.423qt)

Brake Fluid

JG3

300ML(0.317qt)

Drive Shaft

U-Joint Grease

Locate fittings and grease

Engine Oil

Always check the oil level

daily

. Change the engine oil at the intervals outlined in the Periodic Maintenance Chart.

Always change the oil filter whenever changing oil.

WARNING!

Vehicle operation with insufficient, deteriorated or contaminated engine oil will cause

accelerated wear and may result in engine seizure, accident and injury. Always perform the

maintenance procedures as outlined in the Periodic Maintenance Chart.

Oil Recommendations

NOTICE:

Use of a non-recommended engine oil may cause serious engine damage.

WINWAY recommends the use of L-ECD grade oil (

15W/30 or 15W/40

) for this vehicle. Always use the correct

viscosity grade based on the ambient temperature expected during operation.

Oil Check

The oil dipstick is located on the engine under the cargo box.

1. Position the vehicle on a level surface.
2. Stop the engine.

3. Lift the cargo box.

4. Remove the dipstick. Wipe it dry with a clean cloth.

5. Reinstall the dipstick, then remove it and check the oil level.

Maintain the oil level in the safe range. Do not overfill.

Tip:

Due to the dipstick entry angle into the crankcase,

The oil level will read higher on the bottom side of the

dipstick. Always read the level on the upper surface of

the dipstick.

MAINTENANCE

Engine Oil

Oil and Filter Change

Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart. Always change the oil

Dipstick

Min

Max

Min

Max

Содержание FARMBOSS II




































































Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды

Winway FARMBOSS II, Руководство пользователя

Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды