Winway FARMBOSS II Скачать руководство пользователя

Страница: 24 / 67





OPERATION

WARNING

Failure to operate the vehicle proper ly can result in a collision, loss of control, accident or rollover, which may

result in serious injury or death. Read and understand all safety warnings outlined in this owner ’s manual.

Break-In Period

The break-in period for your new vehicle is the first 50 hours of operation. No single action on your part is as

important as a proper break-in period. Careful treatment of a new engine will result in more efficient performance

and longer life for the engine.

New Engine Break-In

1. Fill the fuel tank with the recommended fuel.

2. On the initial engine start-up, allow the engine to idle for approximately 15 minutes. Check for proper engine

oil pressure, diesel fuel leaks, engine oil leaks, coolant leaks and proper operation of the indicators and gauges.

3. During the first hour of operation, vary engine speed and the load on the engine. Short periods of maximum

engine speed and load are desirable. Avoid prolonged operation at minimum or maximum engine speeds and loads

for the next 4 to 5 hours.

4. During the break-in period, carefully observe the engine oil pressure and engine temperature.

5. Check the engine oil and coolant levels frequently during the break-in period. Perform regular checks on areas

outlined on the daily pre-ride inspection checklist.

6. Change both the oil and the filter at 50 hours.

7. Check fluid levels of transmission and all gearcases after the first 25 hours of operation and every 100 hours

thereafter.

8. Inspect and adjust park brake cable tension after the first 25 hours of operation and every 100 hours thereafter.

CVT Break-in (Clutches/Belt)

A proper break-in of the clutches and drive belt will ensure a longer life and better performance. Break-in the

clutches and belt by operating at slower speeds during the break-in period as recommended. Pull only light loads.

Avoid aggressive acceleration and high speed operation during the break-in period.

If a belt fails, always clean any debris from the duct and from the engine compartment.

OPERATION

Pre-Ride Inspection

Содержание FARMBOSS II




































































Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды

Winway FARMBOSS II, Руководство пользователя

Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды