Winway FARMBOSS II Скачать руководство пользователя

Страница: 8 / 67





SAFETY

Safe Riding Gear

The driver and all passengers must wear helmet, eye protection, gloves, long-sleeve shirt, long pants,

over-the-ankle boots and seat belt at all times. Protective gear reduces the chance of injury

SAFETY

Safety Labels

Warning labels have been placed on the vehicle for your protection. Read and follow the instructions of the labels

on the vehicle carefully. If any of the labels depicted in this manual differ from the labels on your vehicle, always

read and follow the instructions of the labels on the vehicle.

Drive Responsibly Warning

WARNING

Improper UTV use can result in SEVERE INJURY or DEATH.

NEVER operate:

without proper training or instruction.

at speeds too fast for your skills or the conditions

on public roads-a collision can occur with another vehicle.

with a passenger-passengers risk of losing control.

ALWAYS:

use proper riding techniques to avoid vehicle overturns

on hills and rough terrain and in turns.

avoid paved surfaces-pavement may seriously affect handing

and control.

LOCATE AND READ OWNER'S MANUAL.

FOLLOW INSTRUCTIONS AND WARNINGS.

Age Restrictions

WARNING

Operating this UT V if you are under the age of 16 will increase your chance of severe INJURY or DEAT H.

NEVER operate this UTV, if you are under age 16.

Содержание FARMBOSS II




































































Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды

Winway FARMBOSS II, Руководство пользователя

Результаты поиска

Содержание FARMBOSS II

Отзывы:

Похожие инструкции для FARMBOSS II

Бренды по названию

Популярные бренды