Winway FARMBOSS II Скачать руководство пользователя страница 5

Страница: 5 / 67





INTRODUCTION:

FARMBOSS

diesel utility is designed for work and not for high speed competition use, there will always be new

ways of have accidents, but WINWAY’s sincere desire is for you to work safety. Remember inexperience is the

biggest contributing factor in accidents. Read this manual carefully, obey the instructions, warnings and cautions

and always use commonsense. Remember loss of control can lead to serious injury or death. Young adults and

inexper ienced riders, must have proper instruction and be fully supervised, until fully competent to ride an UTV.

Make sure all instructions are understood.

Remember you are responsible for your own safety and the safety of those in your care. WINWAY cannot be held

liable for accidents no matter what the cause. You are responsible for checking your vehicle thoroughly for faults,

and for riding in a safe manner.

With any motor vehicle operation, there is an element of risk. By choosing to ride this vehicle, you have accepted

this risk. WINWAY is not responsible for negligence, speeding, component failure, inexperience and other

unforeseen circumstances, that can cause injury or death.

Particularly important information is distinguished in the manual by the following notations :

ATTENTION:

The Safety Alert Symbol means:

ATTENTION! BE ALERT! YOUR SAFETY IS INVOLVED!

WARNING:

Failure to follow WARNING instructions c ould

result in severe injury or death to the vehicle

operator, a bystander or a person inspecting or

repair ing the vehicle.

CAUTION:

A CAUTION indicates special precautions that

must be taken to avoid damage to the vehicle.

NOTE:

A NOTE provides key information to make

procedures easier or clearer.

WARNING

●

Failure to follow the warning and advice in this manual can result in serious injury or death.

● “Warning”- Safety First- Important notice.

To assist you with safety, here is some advice you need to be aware of.

Only you can protect yourself.

Safety is your responsibility, for yourself and minors in your care.

Pay attention and obey the warning labels on the vehicle, (if they become faded or are removed, replace

them immediately).

Take introduction and make certain you are fully aware of, and able to operate, the controls of the

vehicle.

Ride under the instruction or a competent teacher, until you are an experienced rider.

These vehicles are designed and manufactured for off road use only. It is illegal and unsafe to use the

machine on any public street, road, or highway, tarred, dirt, paved, or cement.

Please check your local riding laws and regulations before operating this machine.

Please check local environmental laws and respect them. WINWAY would like to keep our environment

clean, safe, and beautiful for all to enjoy as we are sure you do.

Riding and UTV is a serious matter, it can be hazardous to operate. A collision, or roll over can occur

quickly, with often serious consequences, even routine manoeuvres, like turning, riding over obstacles

and sloping ground, or across water, mud, or loose surfaces can be hazardous. The quad handles

Содержание FARMBOSS II




































































Результаты поиска

Содержание FARMBOSS II

Отзывы:

Бренды по названию

Популярные бренды

Winway FARMBOSS II, Руководство пользователя

Результаты поиска

Содержание FARMBOSS II

Отзывы:

Бренды по названию

Популярные бренды