Wintriss ShopFloorConnect SMI 2, Руководство по установке

Страница: 33 / 44

1146400 SFC Machine Interface (SMI 2) Installation Manual
Chapter 5
– System Messages
33
Chapter 5
– System Messages
This chapter documents SMI 2 system messages. Most messages appear on the status line of the
SMI 2 Main Menu and on the line beneath it; two messages display beneath the screen title on the
Security Settings screen. Documentation for each message includes an explanation of what the
message means and instructions for how to respond to the message if necessary. The chapter is
organized in the following sections:
Messages on the Status Line of the Main Menu ...................................................................... 33
Changeover ................................................................................................................. 33
Control Setup Transition ............................................................................................ 33
Idle .............................................................................................................................. 33
Offline ........................................................................................................................ 33
Parts Preset Reached .................................................................................................. 34
Planned ....................................................................................................................... 34
Running at (cycles per min) . . . . ............................................................................... 34
Unplanned .................................................................................................................. 34
Messages Below the Status Line of the Main Menu ............................................................... 34
Function disabled while running ................................................................................ 34
Parts count preset has been exceeded ......................................................................... 34
Push Production when ready to run ............................................................................ 34
Messages on the Security Settings Screen ............................................................................... 34
Invalid password entered ............................................................................................ 34
Password out of range (0-9999) ................................................................................. 34
Messages on the Status Line of the Main Menu
Changeover
Displays following the “Control Setup Transition” message (see below) after you load a new
job. Also displays whenever you select the “Changeover” item on the Forced Downtime
Menu or Select Downtime screen. Indicates that the machine is in the “Changeover” state.
Control Setup Transition
Displays for a few seconds after you load a new job, being followed by the “Changeover”
message (see above). Indicates that the machine is in transition to the “Changeover” state.
Idle
Displays whenever the press is not in one of the other machine states and you have selected
no reason for planned or unplanned downtime on the Forced Downtime Menu or Select
Downtime screen. Also displays whenever you press
Production
following SMI 2 power-up,
a period of planned or unplanned downtime, or a tool change. Indicates that the machine is in
the “Idle” state.
Offline
Displays whenever there is no power to the machine or the network is down.