Wintriss Shadow 8, Руководство пользователя

Страница: 24 / 159

Shadow 8 User Manual 1139300
Introduction 1-13
Specifications
Shadow 8 specifications are shown in Table 1-1.
Table 1-1. Shadow 8 Specifications
All specifications are the same for both Main and Extension units. Four segments (one Main and up
to three Extensions) can be connected in series up to a maximum protection length of 202 in. For
either transmitter or receiver, the length of heads and interconnect cabling, not including Main
Cables, cannot exceed 110 ft.
Scanning heights 12.6 (320), 17.3 (440), 23.6 (600), 29.9 (760), 36.2 (920), 47.2 (1200), and
59.8 in. (1520 mm). 9.4 in. (240 mm) for Extensions only.
Scanning range Default setting: 1 to 65 ft. (0.3 to 20 m) minimum.
Can be set to “short range,” 1 to 26 ft. (0.3 to 8 m) minimum. May help in
installations where cross-talk is a problem.
Beam spacing 0.79 in. (20 mm) centers
Object sensitivity 1.18 in. (30 mm) (use of fixed and/or floating blanking increases this value)
Response time 23 mS for up to 42 in. (1060 mm) combined length with extensions
32 mS for up to 85 in. (2160 mm) combined length with extensions
41 mS for up to 128 in. (3240 mm) combined length with extensions
50 mS for up to 171 in. (4340 mm) combined length with extensions
59 mS for up to 202 in. (5120 mm) combined length with extensions
If light curtains are wired to optional Shadow 8 control, add 10 mS to
response time for N/O safety relay outputs, 20 mS for N/C output.
Size
Optic heads
Control box
See Figure 2-6 and Table 2-2, page 2-19, and Figure 2-7, page 2-20.
7.4 x 10.8 x 2.8 in. (189 x 274 x 70 mm). See Figure 2-19, page 2-30.
Construction
Heads
Control
Cables
Extruded aluminum; 0.1 in. (2.6 mm) wall min.
14-gauge, .081 in. (2 mm) welded steel with enclosure clasp
16 ft. (5 m), 33 ft. (10 m), 50 ft. (15 m), and 100 ft. (30 m) with connector on
one end for attachment to pigtails on Main Receiver and Transmitter
1 ft. (0.3 m), 3 ft. (1 m), 6 ft. (2 m), 10 ft. (3 m), 16 ft. (5 m), and 33 ft. (10 m)
with connectors on both ends for attachment to Main or Extension Heads
Environmental
Heads
Control
Cables
Vibration
Shock testing
IP65
IP65
NEMA 4 connector; oil-resistant PVC cable standard
10-55 Hz maximum on all three axes.
10 g for 0.016 seconds; 1,000 shocks for each of three axes.