Wintal PVR10, Руководство пользователя

Страница: 7 / 48

7
1.4 rear Panel
1 3 6 7 11
2 4 8
9 13 14 15 16 17 18 23 24
10 12 19 20 21 22 5
label function
1. ant In 1
Connect to your terrestrial antenna
2. looP out 1 Loop out RF signal to ANT IN 2 using the included cross over RF lead
3. ant In 2 Input RF signal from LOOP OUT 1 using the included cross over RF lead
4. looP out 2
Loop out RF signal to another receiver and/ or VCR
5. ethernet Connect to the internet
6-7-8. y Pb Pr Component video
oUtPUt
(supports high definition video output)
9. cvBS
CVBS (composite) video
oUtPUt
10-11. l-r Stereo Left and Right audio
oUtPUt
12. S-vIdeo
Y/C (S-VHS) video signal
oUtPUt
13-14-15. InPut 1
Composite Audio/ Video signal
INPUt
from external source
16-17-18. InPut 2 Composite Audio/ Video signal
INPUt
from external source
19. uSB
Rear USB port
INPUt
for JPG photos, MP3 music
20. hdMI HDMI high definition video
oUtPUt
21. S/P dIf (Sony/ Philips Digital Interface) Digital Audio
oUtPUt
to amplifier/ AV receiver
22. 12v 3.0a
DC power supply
23. rS-232 Serial port for firmware upgrades
24. on/ off Power switch
1.5 reMote control
Insert the “AAA” batteries provided before using your remote control. Please make sure you observe the correct
polarity when inserting batteries.