WinSystems PPM-C407, Руководство по эксплуатации продукта

Страница: 37 / 69

PPM-C407/Configuration
v1.0 www.winsystems.com Page 33
7.8.15 J505 Ethernet
The PPM-C407 has an Intel
®
i210 single chip 1 Gb/s Ethernet Controller that includes
full magnetics (Bothhand GST5009) and surge suppression.
Layout and Pin Reference:
The Ethernet connection is a Samtec TFM-105-02-L-DH, 2x5, 0.05" pitch locking header
connector (WS G650-2010-5H0A).
Matching connector: Samtec ISDF-05-D-M housing with Samtec CC03L-2830-01-G
crimp pins. WinSystems cables simplify connection to the board:
• CBL-ENET1-302-12: RJ45 Jack (shown)
• CBL-ENET1-303-12: RJ45 Plug
7.9 Jumpers
Jumper Part Number SAMTEC 2SN-BK-G applies to all jumpers. These are available in a
ten piece kit from WinSystems (Part# KIT-JMP-G-200).
7.9.1 JP1 AT/ATX Power Mode
The presence of a jumper at JP1 specifies the style of supply connected to the single
board computer (see “J1 Power Connector” on page 16). AT Power is a simple on/off
power supply with no interaction with the single board computer. Most embedded
systems use this type of power supply (default setting).
Purpose: Specifies the style of power supply connected
Jumper Pin Reference
:
Pin Name Pin Name
1 MX0_P 2 MX0_N
3 MX1_P 4 MX1_N
5 MX2_P 6 MX2_N
7 MX3_P 8 MX3_N
9 NC 10 NC
9 10
2 1
Jumper AT / ATX Mode Select
1-2 Jumper Installed: AT Mode (Default)
Open Open (no jumper installed): ATX Mode
1 2
PRELIMINARY