WinSystems PPM-C407, Руководство по эксплуатации продукта

Страница: 24 / 69

PPM-C407/Configuration
v1.0 www.winsystems.com Page 20
WinSystems battery BAT-LTC-E-36-16-2 and BAT-LTC-E-36-27-2 (connected to J3)
simplify these connections to the board.
7.8.4 J5 LVDS and Audio Connector
NOTE The PPM-C407 has one VGA, one DisplayPort and one Low-Voltage Differential
Signaling (LVDS) interface. Only two of the three outputs may be active simultaneously.
The LVDS portion of this connector can be configured (see “JP4 Low-Voltage
Differential Signaling (LVDS)” on page 34). Use the LVDS portion to connect to the
LVDS interface (includes pins 1 through 21, non-shaded in the following table).
Use the audio portion to connect to the Audio interface (pins 22 through 30, shaded in
the following table).
Layout and Pin Reference:
BAT-LTC-E-36-16-2 BAT-LTC-E-36-27-2
Pin Name Pin Name
1 LVDS_VCC (LVDS) 2 GND (LVDS)
3 D0- (LVDS) 4 D0+ (LVDS)
5 D1- (LVDS) 6 D1+ (LVDS)
7 LVDS_VCC (LVDS) 8 GND (LVDS)
9 D2- (LVDS) 10 D2+ (LVDS)
11 D3- (LVDS) 12 D3+ (LVDS)
13 LVDS_VCC (LVDS) 14 GND (LVDS)
15 CLK- (LVDS) 16 CLK+ (LVDS)
17 DDC_CLK (LVDS) 18 GND (LVDS)
19 DDC_DATA (LVDS) 20 GND (LVDS)
21 GND (LVDS) 22 ANALOG_GND (AUDIO)
23 OUT_R (AUDIO) 24 MIC_R (AUDIO)
25 OUT_L (AUDIO) 26 MIC_L (AUDIO)
27 ANALOG_GND (AUDIO) 28 ANALOG_GND (AUDIO)
29 LINE_R (AUDIO) 30 LINE_L (AUDIO)
Non-shaded cells designate LVDS interface.
Shaded cells designate Audio Interface.
1
29
2
30
PRELIMINARY