WinSystems PPM-C407, Руководство по эксплуатации продукта

Страница: 27 / 69

PPM-C407/Configuration
v1.0 www.winsystems.com Page 23
Additional Information
The VGA interface terminates with a Molex 501568-1407, 1x14, 1 mm pitch (Pico-
Clasp™) right angle locking header connector (WS G650-2014-7FB).
Matching connector: Molex 501330-1400 housing with Molex 501334-0000 crimp pins.
WinSystems cable CBL-VGA-002-12 (Pico-Clasp to DB-15) simplifies this connection to
the board.
7.8.7 J8 USB
The PPM-C407 provides four USB2.0 ports with Littlefuse PGB1010603MR (WS G607-
0013-004) ESD surge protection and Murata DLW21HN900SQ2L common mode noise
suppressors (WS G605-1014-000). The TI TPS2505B1RGWR (WS G673-0025-131)
USB power switch is used to enhance the stability of powering USB devices.
Layout and Pin Reference:
The four ports terminate at a Molex 501571-2007, 2x10, 1 mm pitch (Pico-Clasp™)
right angle locking header connector (WS G650-2020-7HB).
Matching connector: Molex 501189-2010 housing with Molex 501193-2000 crimp pins.
WinSystems cables simplify connections to the board:
• CBL-USB4-000-14: Pico-Clasp to unterminated
• CBL-USB4-001-12: Pico-Clasp to Pico-Clasp
• CBL-USB4-002-12: Pico-Clasp to 2each, 2x4, 2 mm pitch housing (shown)
Pin Name Pin Name
1 USB1V 2 USB2V
3 USB1_N 4 USB2_N
5 USB1_P 6 USB2_P
7 GND 8 GND
9 GND 10 GND
11 GND 12 GND
13 USB3V 14 USB4V
15 USB3_N 16 USB4_N
17 USB3_P 18 USB4_P
19 GND 20 GND
19 1
20 2
PRELIMINARY