Winston WSW1-80L-WM, Руководство по эксплуатации и установке

Страница: 19 / 28

16
6. Installation and connection
Installation instruction diagram
Accessories provided: safety release valve.
Attention
After installing the connecting pipe according to the diagram, open the water tap and the hot water
switch of the unit, make the water inject in the unit. Then there will be a large amount of air draining
off from the hot water switch(This process will lasts for 5-20minutes).When there is just water outflow
but no air outflow, it suggests that the unit is full of water, the air is
completely drained off.
Do not use stainless steel fittings to connect directly with other metals to prevent galvanic
corrosion.
The wall
Stop valve
Heat pumpwater heater
Filter
Cold water inlet pipe
Hot water outlet pipe
Pressure release
valve drain pipe
The draining water pipe
for condensate water
The location of draining water
On draining off the air from the tank