Winston WSW1-80L-WM, Руководство по эксплуатации и установке

Страница: 5 / 28

2
2. Installation position
Suitable i nstallation position
1 The unit can be installed inside or outside of house. Installed in the basement is better.
2 Choose the place without direct sunlight or other radiant heat source . If it is possible,
a cover is necessary to avoid the direct sunlight.
3 No obstacle at the air inlet and outlet, the place without strong wind.
4 The place with enough space to install and maintain should be dry and drafty.
5 The bearing surface should be flat (inclination should be less than 2°) be able to bear
the unit and place the unit without noise and vibration added.
6 The place where the noise and air out will not affect the neighbour.
7 The place without the combustible gas.
8 The place where it is easy to install the pipe and electrical wiring.
9 If the unit is installed on the metal part of building, the electrical insulation which should
be according to the technic standard must be used.
Attention
It will lead to fault to install the unit at the places below (if it is inevitable, please contact us) The
place with mineral oil just like grass cutter oil.
The place with a lot of salinity in the air, for example near the sea..
The place with corrosive gas (sulphur gas etc.),for example the area of hot spring. The
place with the serious power fluctuations, for example near the factory.
In the car or cabin.
The place with oil gas, for example the kitchen. The
place with the strong electromagnetic wave. The
place with inflammable gas and material.
The place with acidity or alkalinity gas.
The others special palces