background image

Page 6

Winkhaus STV

Oper

ating Manual EA

V 0124653 0505

Subject to technical changes

Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · [email protected]

•  the gap between the door frame and sash is increased or decreased, which would 

for instance result from readjusting the hinge plates or from lowering the door;

•  auxiliary lifting tools or objects are used to open or close the lock;
•  the handle and the key are actuated simultaneously;
•  the lock is locked/unlocked by using improper objects;
•  input values different from the ones indicated in the Technical Specifications are 

applied.

1.4.  Explanation of symbols

Symbols and cues are used to identify important information in this operating manual.

Cues such as DANGER or CAUTION indicate the degree of hazard.
Symbols serve to visually emphasize the message.

It is imperative that you do follow the measures listed to avoid safety hazards!

   

 

DANGER!

   

 

Danger of life or danger of serious injuries.

   

 

CAUTION! 

   

 

Danger of material damage.

   

 

NOTICE!

   

 

Useful information and tips.

   

 

ECO-WATCH!

   

 

Notices on complying with regulations on

   

 

environmental protection.

1.5.  Important safety information

Safety information described in this section is to be diligently adhered to regarding the 
installation and use of this security lock. You are to heed the safety information provided 
without exceptions!

•  Read the operating manual and keep it easily accessible for future reference. After 

installing the door pass it on to the end customer.

1. Important information

Содержание AV2









































Отзывы: