manualshive.com logo in svg

Winkhaus STV AV2, Руководство по эксплуатации

Поделиться
Скачать
Winkhaus STV AV2 Скачать руководство пользователя страница 5

Page 5

Winkhaus STV

Oper

ating Manual EA

V 0124653 0505

Subject to technical changes

Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · [email protected]

1. Important information

The stipulations of use as intended have been met, once the Winkhaus fittings are:
•  installed according to their defined function and the installation specifications,
•  not used in another way than described,
•  maintained and cared for at regular intervals as instructed,
•  not used any longer if signs of wear are detected,
•  repaired by trained professionals in the event of malfunctions.

The supplier/manufacturer does not accept any liability for personal injury or material 
damage caused by incorrect operation or improper use.

1.3.  Use contrary to the intended purpose

The locking systems are not designed to absorb or compensate for changes in shape or 
changes in the closing mechanism of the door caused by changes in temperature or in 
the structure of the building.

Doors which are used in damp rooms and in environments with aggressive corrosion-
promoting air compositions require special door furniture.

The locking systems are incorrectly used – that is use contrary to the one described 
above – is evident in particular, if:
•  the instructions on the intended use are not being followed;
•  the problem-free operation is hindered due to the installation of external objects 

and/or objects that are not purpose-conform in the opening zone, the locking sys-
tem or within the center strike;

•  the locking system or the center strike is manipulated in such a way that its design, 

mode of operation or function is changed; 

•  the door is drilled through in the area of the locking houses or of the lock rod once 

the lock has been installed;

•  the additional opening and closing members or the moved-out dead bolt are impro-

perly used in order to keep the door open;

•  force is used to drive the handle pin through the lock spindle;
•  the locking elements are wrongly installed or are tampered with, e.g. by overpain-

ting movable parts like the lock dead bolt or latch; 

•  the locking system is subject to loads which exceed normal manual power and are 

transmitted via the cylinder key;

•  the handle is not loaded in the normal sense of rotation or a power above 150 N is 

applied onto the handle into the direction of actuation; 

Содержание AV2









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды