Winget 2B1500, Руководство оператора и каталог запасных частей, Страница: 20 / 170

Key Starting TR1 engines
Ensure the parking brake is in the
raised "ON" position.
Ensure the gear lever is in the
neutral position.
Fully depress and hold down both
clutch and accelerator pedals.
Check that the decompressor lever, (if
fitted) is away
(N) from the flywheel.
Turn the engine control lever anti-
clockwise to the "STOP" position
(L)
and release it.
Turn the start key clockwise to
position
(1), the battery charging light
(P) will illuminate.
Turn the key and hold at the "START"
position (2) until the engine fires and
then release it immediately.
If the engine fails to start within 20
seconds, release the key and attempt
to restart after allowing sufficient time
for all moving parts to stop.
Stopping the engine
Never stop the engine by
operating the decompressor
lever or valve damage may
occur
Key start engines: Turning
the starter key to the "OFF"
(0) position will not stop the
engine unless an optional fuel
control solenoid is fitted.
It is advisable to run on light load for
a few minutes before stopping
Turn the engine control anti-clockwise
to the "STOP" position
(L) and hold it
there until the engine comes to rest.
Key start engines: After the engine has
stopped, turn the starter key to the
"OFF"
(0) position.
OPERATION 2.6 2.6 OPERATION
DRIVING THE DUMPER DRIVING THE DUMPER