Winget 2B1500, Руководство оператора и каталог запасных частей, Страница: 10 / 170

HYDRAULICS
SERVICING
1.4 SAFE WORKING
NEVER park on a gradient. If this is unavoidable, ALWAYS chock the wheels.
NEVER attempt to turn on a gradient.
NEVER tow up, down or across a gradient.
ALWAYS "Dump" residual pressure from the system before leaving the
machine or before carrying out any maintenance or adjustments.
If maintenance work requires the skip to be in the raised position, then it must
be raised and supported before dumping the pressure.
Dump pressure by switching off the engine, then moving the hydraulic
control lever several times in each direction.
NEVER leave the machine unattended with pressure in the system.
ALWAYS purge hydraulic rams before commencing work. With the engine
running operate the hydraulic control to fully extend and retract the rams. Then
operate the steering lock to lock.
ALWAYS practise the greatest cleanliness when maintaining hydraulic
components.
ALWAYS report any defect at once, before an accident or consequential
damage can occur.
ALWAYS conform to service schedules except where:
1 Warning lights or warning indicators, if fitted, call for immediate
attention.
2 Adverse conditions necessitate more frequent servicing.
ALWAYS wear correctly fitting protective clothing. Loose or baggy clothing can
be extremely dangerous when working on running engines or machinery.
ALWAYS, where possible, work on or close to engines or machinery only
when they are stopped. If this is not practical, remember to keep tools, test
equipment and all parts of your body well away from the moving parts.
ALWAYS "Dump" pressure from the hydraulic system before carrying out any
kind of maintenance or adjustment. (see Service - Hydraulic system).
ALWAYS avoid contact with exhaust pipes, exhaust manifolds and silencers
when the engine is running; these can be very hot.
ALWAYS work out of doors, or in a well-ventilated area.
NEVER run an engine in an enclosed space. Exhaust fumes in enclosed areas
can kill.