19
-
Press button
one second until the targeted temperature is blinking.
-
Use button
to increase the temperature
-
Use button
to lower the temperature.
-
When the right temperature is set, press again on button
to
confirm it.
Explanations of the main display symbols:
Red light
= cold mode engaged (compressor working)
Red light
= Not used
Red light
and/or dF = defrost
Red light
= heat mode engaged (resistance)
•
« IA » code = external alarm or open door (depending model)
•
« dEF » code = manual defrost engaged (see 5.5)
6.3
STANDBY MODE
-
Stanby mode : maintain a 3 seconds pressure on button 1. The
compressor stops.
-
The thermostat indicates « OFF » and also the cellar temperature.
-
To come back, maintain again a 3 seconds pressure on button 1.
-
The thermostat indicates « ON » during 1 second.
6.4 AUTOMATIC DEFROST
