10
9
Product may vary slightly from what is illustrated.
Fabric guide
1. Spray nozzle
2. Water-fill opening
3. Dry/steam selector
4. Steam button
5. Spray button
6. Pivoting cord
7. Temperature-ready light
8. Heel rest
9. Fabric guide
10. Water tank
11. Fabric-select dial
12. Nonstick soleplate
How to Use
This appliance is for household use only.
GETTING STARTED
remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
water softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
TO FILL THE WATER TANK
1. Tilt the iron and using a clean measuring cup, pour water into
opening until the water reaches the MAX level mark on the
water tank
(A)
. do not overfill. refill as needed.
2. Plug in the iron. Temperature-ready light glows when iron has
reached set temperature setting.
Tip:
if unsure of a garment’s fabric, test a small area (on an inside
seam or hem) before ironing.
FOR STEAM IRONING
1. Move the dry/steam selector to the desired steam level
(B)
.
2. Turn the fabric-select dial to appropriate setting (between
4 and 6) for your fabric
(C)
. See fabric guide on the heel
rest and read garment’s label to help you determine fabric
type. The temperature-ready light glows until it reaches the
appropriate temperature. it then cycles on and off during
ironing.
3. When finished ironing, turn the fabric-select dial to lowest heat
setting, move the selector to
J
K
L
M
O
and unplug the iron. Stand the
iron on its heel rest and allow it to cool off.
Important: Always stand the iron on its heel rest when powered on but not in
use.
Surge of Steam
use to remove stubborn creases.
1. With water tank filled to the MAX mark, turn the fabric-select dial to at least
setting 4 and wait for the temperature-ready light to go off.
B
a
b
C
g
A
J
K
L
M
O
J
K
L
M
O
Dry
Steam
Spray
Symbols
