25
2.
For the Installer
2.4.22 Checking the cladding door switch
– When closing the cladding door, the cladding door switch must still have sufficient shifting travel after switch-
ing (audible clicking) before the cladding door is totally closed – Fig. 50. If necessary, use a screwdriver at the
top inside the control panel to reset – Fig. 51.
2.4.21 Adjusting the cladding
– Adjust side panels, cladding door and control panel visually by the width of the cladding door or equal gap size
and tighten all screws – Fig. 49.
Fig. 49 Adjusting cladding, tightening all screws
Fig. 50 Door switch must click
Fig. 51 Reset door switch with screws
