30
3.
For the Electrician
– Remove rear boiler cover (Fig. 59), loosen 2 screws from front boiler cover (Fig. 60) and lift up cover and pull
off to the rear – Fig. 61.
Fig. 59 Removing the rear boiler cover
Fig. 60 Loosen 2 screws
Fig. 61 Lifting boiler cover and pulling off
to the rear
– Check 4-pin plug on InfoWIN cable, route to left side from control panel as necessary (see also 2.4.19), connect
and route in side panel – Fig. 62.
Fig. 62 Connect InfoWIN cable if necessary and route in side panel
InfoWIN cable
