Windhager INFOWIN TOUCH, Руководство по эксплуатации

Страница: 42 / 44

42
8. For the service technician/heating technician
8.4 Starting up the integrated web server
8.4.1 Internet connection and router configuration
An Internet connection is needed for communication. The Internet router must assign the InfoWIN Touch a local IP
address. This requires a DHCP server (standard function of router). If the firewall settings prevent a connection being
established with the "WindhagerConnect" Windhager portal server, they must be changed accordingly. No other settings
are needed. Please observe the operating manual for your Internet router.
8.4.2 Start-up
1. The InfoWIN Touch must be de-energised (interrupt supply voltage).
2. Use a LAN cable to connect the Internet router to the InfoWIN Touch.
3. Connect the 4-pole LON plug to the InfoWIN Touch.
Once the voltage supply has been connected to the InfoWIN Touch, the Windhager logo and a charge bar appear on
the device after a short delay. When turning on for the first time, the language must then be selected (see Section 2.7).
Otherwise, the homescreen is displayed straight away and the LED lights up green. The status of the connection to
Windhager Connect, etc., can then be checked and set under "Basic settings > LAN" (Section 2.9).
Your system is now ready and you can operate and control your heating system with the Windhager app "myComfort".
8.4.3 Reserved IP address ranges
The internal web server uses the following IP address ranges for internal communication and/or to establish a connec-
tion with the database: 10.254.253.xxx; 10.8.xxx.xxx and 10.9.xxx.xxx.
These IP address ranges must not be used by the router and/or in the LAN network.