Windhager INFOWIN TOUCH, Руководство по эксплуатации

Страница: 13 / 44

13
2. InfoWIN Touch display and operating unit
2.7 Turning on for the first time
Setting the language, choosing the boiler and guided start-up
CAUTION
Before turning on for the first time, the system must be fully wired up electrically, the
DIP switches for the function modules (MES INFINITY control system) must be set
correctly, and the function modules (MES INFINITY control system) and boiler(s) must
be connected to one another – see the installation instructions for the relevant units.
When turning the system on for first time, the language (Fig. 11) and then the boiler (Fig. 12) must be selected. These
displays do not appear again once the button has been pressed. To change the language and boiler at a later date,
see Section 2.9 Basic settings.
Fig. 11 Choosing the language
Language selection
Dansk Deutsch English Español
Français Italiano Polski Slovenščina
Fig. 12 Choosing the boiler
Choose boiler
Pellets Wood Combi boiler Wood chips
Heating oil No MB 1 MB 2
Choose boiler
Setting determining which boiler the InfoWIN Touch controls, e.g. wood chips, wood or pellet boiler, etc.
Factory setting: No, the setting must be selected when the boiler is turned on for the first time.
Selection:
Pellets: BioWIN 2
Wood: LogWIN
Combi boiler: DuoWIN
Wood chips: PuroWIN
Heating oil: No function
No: No boiler, e.g. for MultiWIN PLUS , simply master operation for remote switching or
web server
MB1: Master control 1 (without boiler)
MB2: Master control 2 (without boiler)