Wincor Nixdorf TH320, Руководство программиста

Страница: 66 / 157

Programmers Guide TH320/420
58
f = 0 turn off all colorization functions (default). No other parameters are required.
f = 1 link print logo after knife cut – equivalent to printing a transaction header graphic.
Example:
Print logo (#F0) after a knife-cut with “s” dot row spacing before the logo and “a” dot row spacing after
the logo (1F 03 16 01 s p).
After executing a knife-cut command, if s > 0, execute the following:

stop background merging (1D 9B 1 command)

skip s (feed paper) dot rows (15 s command) – adds spacing in addition to any set by the
application around a knife cut command

set centered justification (1B 61 1 command), saving the previous justification

if the logo at F0h is currently defined, print logo by sending print downloaded bit image,
normal size (1D 2F 0 command) without changing the value of current logo

reset justification to previous value (1B 61 [previous value])

skip (feed paper) “p” dot rows after logo (15 p command)
Since the normal space on the receipt paper after a knife cut is 18 mm (144 rows), no extra space
is usually needed above the logo. The default value is s = 0 and turns off the f = 1 logo after knife-
cut link.
f
= 2 link water mark printing
Example:
Activate watermark printing using logo #F1 (1F 03 16 02 s r) with “s” being the skip distance in dot
rows before activation and “r” is the distance in mm between watermark repetitions.
After executing a knife-cut command and the f = 1 steps, if s > 0, execute the following:

skip “s” (feed paper) dot rows (15 s command)

set watermark printing to “on” using logo F1 (execute merge watermark mode -1D 8C r F1
command). Logo must be defined for F 1 and comply with watermark mode requirements in
order for this happen.

stop background merging mode (1D 9B 1 command). Clears background for logos,
barcodes, and captured images.
The watermarks feature is now activated (following an optional F0 logo) to start after each knife
cut. Note that when printing graphic objects merging is turned off by each knife cut. The default
value is s = 0 and turns off the f = 2 watermark link.
No correlation exists (when both are set) between watermark and logo skip distances.
If the f = 4 logo link is undefined, you should set a null trailer logo with s = 1 and p = 144
(1F 03 16 04 1 90, no logo at index F3). This will turn off watermarks at the position of a knife cut
and leave a clear space at the top of the next receipt.
f = 3 link margin message printing
Example:
Activate margin message printing using logo #F2 (1F 03 16 03 s r t) with “s” being the skip
distance, “r” the distance between repetitions and “t” the toggle mode.
Toggle mode values for t:
0 = both left and right side
1 = toggle sides, starting with left side
2 = right side margin message only
3 = left margin message only
After executing a knife cut command and the f=1 steps, if s > 0, execute the following: