Wincor Nixdorf TH320, Руководство программиста

Страница: 21 / 157

TH320/TH420 Programmers Guide
13
Print zones
Print zones for receipt station 80 mm paper
Specifications of print zone for receipt station 80 m paper:
576 dots (addressable) @ 8 dots/mm, • Top margin to manual tear-off: centered on 80 mm 17.8 mm
(0.70 inches)
Minimum margins for standard print: • Top margin to knife cut: 2.0 mm (.079 inches)
19.0 mm
(0.75 inches)
Note:
The application centers 44 standard character cells (13
×
24 dots), or 56 compressed character cells
(10
×
24 dots), or 576 addressable bits of graphics across an 80 mm wide receipt. Minimum print line
height is 24 dots for text or graphics. Standard print line spacing is 27 dots (i.e. 3 extra row dots).
The TH320 adds a 27 dot high font, so standard print spacing is 30 dots.
Print zones for slip station TH320
The slip station prints characters (standard and compressed pitch) and graphics in a print zone of 77mm
(3.0") wide on a slip or form.

Standard pitch: 42 characters (columns) per line

Compressed pitch: 51 characters (columns) per line

21 rotated characters

210 adjacent bits of graphics

420 addressable positions
The print line height of 7x7 dot characters is 2.46 mm (.097"). With three-dot spacing, the print line
height is 3.53mm (.139"). See the following illustration (not to scale). To print as close to the bottom
of the slip as possible without the slip leaving the feed rollers, use the “Print and feed n lines” (1B 64 n)
command, with n = 0.