TH320/TH420
Programmers Guide
23
Select cut mode and cut paper
ASCII
GS V
m
GS V
m n
Hexadecimal
1D56
m
1D56
m n
Decimal
29 86
m
29 86
m n
Value of m:
Selects the mode as shown in the table.
Value of n:
Determines cutting position only if m is 65 or 66.
Formulas
n times the vertical motion unit is used to determine the cutting position to which the paper is fed.
Exceptions
If m is out of the specified range, the command is ignored.
m Feed and cut mode
0, 48 Full cut (no extra feed). Partial cut on the TH320.
1, 49 Partial cut (no extra feed).
65
Feeds paper to cutting po (
n
times vertical motion unit), and cuts the paper.
66
Feeds paper to cutting po (
n
times vertical motion unit), and performs a partial cut.
Range of m:
0, 48; 1, 49
65, 66 (when used with n)
Range of n:
0 – 255
Default of m, n:
0
Selects a mode for cutting paper and cuts the paper. There are two formats for this command, one
requiring one parameter m, the other requiring two parameters m and n. The format is indicated by the
parameter m.
Set paper type
ASCII
GS 0x81 m n
Hexadecimal
1D81mn
Decimal
29 129mn
Value of m:
0= monochrome (black) paper (Wincor Nixdorf T 55)
1= Two-color (red/black) papers (Kanzaki P-310RB)
4= Two-color (blue/black) papers (Kanzaki P-320BB)
5= Two-color (red/black) papers (Kanzaki P-320PB)
Default:
0 (monochrome paper)
This command will set the optimum parameter values in the thermal print engine control hardware for
any defined monochrome or two-color paper chemistry. The
m n
parameters select paper category
and formulation version, respectively.
( m n
= 0 0) defines the default monochrome (black category, initial version) paper, out-of-box printers will
also have factory pre-set descriptions for customer selected color types; initial release consists of two
defined color types:
( m n
= 1 0) Kanzaki P-310RB red/black paper,
( m n
= 4 0) Kanzaki P-320BB
blue/black paper, and
( m n
= 5 0) Kanzaki P-320RB red/black paper.
When issuing this command a value of
n
= 0xFF can always be used; that is interpreted as requesting
the setting of the highest version defined in the printer of that category. This is a safe way for an
application to always select the latest of a manufacturer’s paper category, thus choosing “ latest
standard red/black”.
Содержание TH320
