10
REV F
60706-209
mounted on the generator set which is located behind an access cover
in the rear of the unit.
The battery tender receptacle is to be powered by a GFCI circuit and
installed in accordance with the United States National Electric Code.
These AC wires can be run in the same conduit as the other AC leads
from the generator. It is suggested that this circuit be fused for 15
Amps. Terminal block connections have been provided in the customer
connection area of the engine-generator set. See following diagram.
NOTICE:
The battery tender is not intended to recharge a battery which has
become completely discharged. It is designed to produce enough
current to recharge a slightly low battery and maintain a fully charged
battery.
SOLAR CHARGER OPTION
(If equipped)
The WINCO solar option consists of two parts; one, the solar panel
and two, the Sun Guard charge controller. The solar panel collects the
energy while the Sun Guard controls the charging process acting as
a switch to prevent the solar panel from discharging or overcharging
the battery. If you are experience problems with solar charging system
contact WINCO service for trouble shooting instructions.
This package also included external receptacles, a 14-50 50 Amp and
a 5-20 20 Amp duplex.
Note: this option has a 50 Amp circuit breaker.