Page 38 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
FIG B
FIG C
2.
Using the provided #2 screwdriver bit is in place (
FIG C
)
3.
Place bit into hole in safety cover (aligned with tube) engaging leveling
screw (
FIG B
). There are 3 holes, use the hole nearest patient surface.
4. Rotate the screw clockwise to raise tip of L-Arm or counter-clockwise to lower tip of L-Arm
5. Continue adjusting until the arm is level when resting in the down position without any weight
L-ARM LEVEL ADJUSTMENTS - CONTINUED
CHANGING THE POSITION OF L-ARM
THE FOLLOWING INSTRUCTIONS ARE ONLY TO BE USED TO CHANGE THE
POSITION OF THE L-ARM (RIGHT TO LEFT OR LEFT TO RIGHT).
1.
Pull down on spring loaded pin
(FIG 1-1)
and slowly pull the L-Arm toward you until separated from
short arm
(FIG 1-2
)
FIG 1
ARM SHOWN ON PATIENT LEFT
