Use the cursor control key to select a frequency pa-
rameter from the marker list. The selected fre-
quency parameter is highlighted in reverse video
and displayed in full below the marker list.
Editing a Marker List Frequency
If you want to change a selected marker list fre-
quency parameter’s value, press
Edit
to open the
frequency parameter, then edit the current fre-
quency or enter a new frequency.
Tagging a Marker List Frequency
Only frequencies on the marker list that have been
tagged can be output as markers during a sweep.
Press
Tag
to tag a selected frequency parameter
(place an
m
in front of it). If a frequency parameter
is already tagged, pressing
Tag
will untag it (re-
move the
m
).
Activating Markers
The soft-keys
Video Markers
and
Intensity Markers
toggle the markers on and off.
Video Markers–To output the tagged marker fre-
quencies as video markers during an analog or step
sweep, press
Video Markers
. Video markers will be
displayed on the CRT for all tagged marker frequen-
cies that are within the sweep frequency range.
Intensity Markers–(only available in analog
sweep frequency mode) To output the tagged marker
frequencies as intensity markers during an analog
sweep, press
Intensity Markers
. Intensity markers
will be displayed on the CRT for all tagged marker
frequencies that are within the analog sweep fre-
quency range.
Press
Previous Menu
to return to the Sweep Fre-
quency Control menu.
LOCAL (FRONT
SWEEP FREQUENCY
PANEL) OPERATION
OPERATION
681XXB OM
3-33
