To close the open parameter when you are finished
editing , press
Edit F1
or make another menu selec-
tion.
Entering a
New Value
To change the current value of a parameter by enter-
ing a new value for the parameter, use the data en-
try keypad and termination keys.
As soon as you press one of the keys on the data en-
try keypad, the current parameter display clears for
entry of a new value. Enter the new value for the pa-
rameter, then press the appropriate terminator key
to store it in memory. If the entered value is outside
the allowable range of the open parameter, the en-
try is not accepted and the previous value for the pa-
rameter is displayed.
NOTE
A frequency entry may be terminated in
GHz, MHz, kHz, or Hz; however, it is al-
ways displayed on the data display in
GHz. A time entry may be terminated in
Sec, ms,
µ
s, or ns; however it is always
displayed on the data display in Sec.
If you make an error during data entry, either (1)
press
BACK SPACE
to delete the entry one charac-
ter at a time starting from the last character en-
tered, or (2) delete the entire entry by pressing
CLEAR ENTRY
. Then, reenter the correct value.
Now, try entering a new value for the CW frequency
displayed on your synthesizer using the data entry
keypad and termination keys.
To close the open parameter when you are finished
entering data, press
Edit F1
or make another
menu selection.
LOCAL (FRONT
ENTERING
PANEL) OPERATION
DATA
2
3
1
6
5
4
9
8
7
0
dBm
Sec
GHz
dB
ms
MHz
kHz
s
m
STEPS
ADRS
ns
Hz
CLEAR
ENTRY
BACK
SPACE
Clear
Entry
Key
Back
Space
Key
Keypad
Terminator
Keys
3-18
681XXB OM
