background image

Electrical connection

The electrical connection is made to an earthed socket with 230 V ~ 50 Hz; protection at least 10 A.

Commissioning

Set up the device on a level and firm place, whose temperature does not exceed 40 

. The

device must be level at the location so that it can work properly.

Establish the electrical connection.

Safety instructions

 CAUTION:

For your own safety, please follow the advice below, otherwise damage and / or injury could result:

The temperatures of parts of the station can be up to 480 

 during operation, therefore:

Do not use the station near flammable gases, paper or other flammable materials.

Avoid touching hot parts of the station, otherwise you could be seriously burned.

Do not touch the metallic parts near the soldering tips.

Temperature protection:

The device is equipped with an automatic temperature protection which switches off the
device if one of the temperatures is too high.

The device switches on again when the status has returned to normal.

Handle the device carefully:

Never drop it and do not subject it to knocks.

Contains sensitive components that could be destroyed if improperly handled.

Disconnect the device from the power supply if you do not need it for a long time, if there is a
power failure or before you open it.

Soldering may produce harmful fumes. Only solder in a well-ventilated work area to avoid
harmful concentrations.

Do not make any structural changes to the device.

Product description

The Aoyue repairing/hot air soldering station I combines the functions of a hot air
gun, a soldering iron, a solder fume extractor and a desoldering gun in one device.

The dual output system of the I enables the desoldering gun and soldering iron to
be operated at the same time.

The nozzle was equipped with a special air distribution technology (air spreader) allowing an
even better reflow soldering, as the air and heat distribution has been optimized.

Paired with the technology of the AOYUE BGA nozzles of the fourth generation, the reworking
of large ball grid arrangements (such as central processing units, CPUs, or graphics pro-
cessors, GPUs) becomes more efficient and easier to carry out.

The system has various safety functions such as the self-cooling function of the heat gun. This
function protects the device and its components from overheating in the following situations,
for example:

if the heat gun has not been used on the holder for a long period of time;

when the temperature gets too high.

The temperature and the air flow can be conveniently set separately using 4 buttons each.
The heat gun, the soldering iron and the desoldering gun have an adjustable automatic sleep
function.

Five different reworking profiles can be saved, so that constant work can be guaranteed auto-
matically.

© by WilTec Wildanger Technik GmbH 

Item 

Page 4

http://www.WilTec.de
http://www.aoyue.eu  

  

03 2021

-1

http://www.teichtip.de

Содержание 902703A+
























Отзывы: