Desoldering gun
№ Name
Function
№ Name
Function
1
Filter holder
Securing the filter
6
Trigger
Starting the extrac-
tion (press to do so);
do not press if the
nozzle is not fully
warmed up.
2
Eject knob
Unlocking to remove
the filter
7
Heizelement
Heating; has to be
cleaned regularly.
3
Druckanzeige
Indicating when the
nozzle or heating
element
needs
cleaning, or the filter
needs replacing.
8
Heißdüse
Melting solder, input
for melted solder
4
Vacuum hose
Connecting to the
station
9
Filter
Collecting solder and
flux in a ceramic pa-
per filter
5
Electric cable
Connecting to the
station
1. Plug the connection cable of the desoldering gun into the socket
(8)
provided on the front of
the device.
2. Follow the instructions under “Commissioning.”
3. Connect the vacuum hose to the socket
(7)
provided for it.
4. Activate the on/off switch
(9)
of the soldering iron. The desoldering gun now heats up to
350
(basic setting).
℃
5. Set the temperature of the desoldering gun to the desired value using the controller
(4)
.
6. Let the desoldering gun heat up. The tip takes about 5–6 min to heat up while the inner solder
drain takes about 5–9 min longer to reach operating temperature. If the operating temperature
© by WilTec Wildanger Technik GmbH
Item
Page 11
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1