Replacing the nozzle
Loosen the safety lock and pull out the housing of the heating element together with the safety lock.
The nozzle can now be changed. Secure the nozzle by tightening the safety lock again.
Replacing the filter pad and the filter spring
Unlock the filter holder by pressing the eject knob. The filter holder is pushed out and enables the filter
tube, which contains the filter pads, the filter spring and the filter tube cover, to be easily removed.
After removing the filter tube, the filter pads and the filter spring can now be removed and
cleaned or replaced.
To reassemble the desoldering gun, attach the spring to the filter tube flap and place the filter
tube back on the gun body.
Push the filter holder back into place until you hear a click, which means that the filter holder is
secured again.
© by WilTec Wildanger Technik GmbH
Item
Page 17
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1
