background image

5. To save the new settings, press and hold the hot air iron function key until the display shows

“SAVE.” Press the up button (arrow up) of the hot air function to confirm saving.

In order to be able to work with the set values, please follow the next steps:

1. Make sure that the hot air function is switched off.
2. Hold down the hot air iron function button 

(17)

 until the display shows “run.”

3. Press the up button (arrow up) of the hot air function to start the automatic rework.

Once started, the station slowly begins to increase the temperature of the hot air unit. After the tem -
perature of segment A has been reached, it is counted down. When “0” is reached after the preset
time, the next segment is started until the entire program has run through. After the end of the pro -
gram, the cooling starts automatically.

Note:

The temperature of the hot air unit can be set from 100 

 to 480

 

.

The air flow rate is adjustable from 15 to 100 

min

.

The hot air unit is equipped with a temperature limiter which only allows a temperature in -
crease of 3 

s

. This corresponds to the industry standard and prevents sensitive components

from being damaged if the temperature rises too quickly.

Soldering iron

1. Insert the soldering iron into the 6-pin socket 

(9)

 provided on the front of the device.

2. Follow the instructions given under “Commissioning.”
3. If you want to use the fume extraction function, insert the hose of the fume extraction into the

socket provided for it 

(7).

4. Activate the on/off switch of the soldering iron 

(14).

 The soldering iron now heats up by itself to

350 

 (basic setting).

5. Set the required temperature using the temperature controller 

(4).

6. If you use the fume extraction system, press the on/off switch 

(15).

7. You can start working when the desired temperature is reached.
8. When you have completed the work, switch off the fume extraction system.
9. Switch off the soldering iron function.
10. Let the soldering iron cool down before packing it up.

© by WilTec Wildanger Technik GmbH 

Item 

Page 10

http://www.WilTec.de
http://www.aoyue.eu  

  

03 2021

-1

http://www.teichtip.de

Содержание 902703A+
























Отзывы: