11
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Mon.- Fri. Hours: 7 am to 6 pm MST.
Understanding the LCD Screen
Figure 3
OVERLOAD
62 AA’ 72
Band
Select
Reset
PUSH
PUSH
UP
DOWN
PUSH
PUSH
GAIN
2
1
3
4
1. Five Bands can be individually selected:
a
700 B12 (AT&T
®
) = Band 12/17 (LTE)
Hold “Band Select” for 3 seconds while in
700 if B12 is not selected.
b
700 B13 (Verizon
™
) = Band 13 (LTE)
Hold “Band Select” for 3 seconds while in
700 if B13 is not selected.
A
700
A
B12
A
OK
A
700
A
B13
A
OK
2
BAND SELECT – Pressing the “Band Select” button will cycle through the
bands. If “700” is selected, holding the “Band Select” button for 3 seconds will
switch between bands 12/17 and 13.
3
UP – Controls the manual gain adjustment.
a. Pressing the “UP” (refer to Figure 3) button will cause the selected gain to
increase in 1dB increments.
b. Gains will never go higher than the maximum (70dB or 75dB).
c. Holding the “UP” button on the initial plug-in will turn all of the manual gains to
maximum (70 dB or 75 dB) to aid the installer during setup.
4
DOWN – Controls the manual gain adjustment.
a. Pressing the “DOWN” (refer to Figure 3) button will cause the selected gain to
decrease in 1dB increments.
b. Gains will never go lower than the minimum (40 dB or 45 dB).
c. Holding the “DOWN” button on the initial plug-in will turn all of the manual
gains to minimum (40dB or 45dB) to aid the installer during setup.