Installation and operating instructions Wilo-Port 800 33
SAFETY
English
•
The pump chamber has only been used under the specified usage
conditions.
1.5.2. Warranty period
The length of the warranty period is set out in the "General Terms
and Conditions of Business".
Any deviations must be contractually agreed.
1.5.3.
Spare parts, attachments and modifications
Only genuine spare parts from the manufacturer may be used for
repairs, replacements, attachments and modifications. Independent
attachments and modifications, or the use of non-genuine parts,
can lead to severe damage to the pump chamber and/or to injury to
personnel.
1.5.4. Maintenance
The prescribed maintenance and inspection work should be carried
out regularly. This work may only be carried out by qualified, trained
and authorised personnel.
1.5.5. Damage to the product
Damage and malfunctions that endanger safety must be eliminated
immediately by trained personnel. The pump chamber may only be
operated in a technically sound condition.
In general, repairs should only be carried out by Wilo customer
service.
1.5.6. Disclaimer
No warranty is granted and no liability is accepted for damage to the
pump chamber if one or more of the following apply:
•
Inadequate configuration by the manufacturer due to the infor
-
mation provided by the operator or customer being insufficient or
incorrect
• Non-compliance with safety instructions and working instructions
as specified in this operating and maintenance manual
• Improper use
• Incorrect storage and transport
• Improper assembly/dismantling
•
Insufficient maintenance
• Incorrect repairs
• Inadequate construction site or construction work
•
Chemical, electrochemical and electrical influences
• Wear
This means the manufacturer’s liability excludes all liability for per
-
sonal injury, material damage or financial losses.
2. Safety
This section lists all the generally applicable safety instructions and
technical information. In addition, all the other sections contain
specific safety instructions and technical information. During the
various life cycle phases of the chamber (installation, operation,
maintenance, transportation etc.), all instructions must be followed
and complied with. The operator is responsible for ensuring that all
personnel comply with these instructions.
2.1. Instructions and safety instructions
This manual uses instructions and safety instructions for preventing
injury and damage to property. To clearly identify them for person
-
nel, the instructions and safety instructions are distinguished as
follows:
•
Instructions appear in bold and refer directly to the preceding text or
section.
