background image

32

 

WILO SE 06-2015 V05 DIN A4

English INTRODUCTION

1.  Introduction

1.1.  About this document

The language of the original operating instructions is German. 

All other languages of these instructions are translations of the 

original operating instructions.

This manual is divided into individual sections, which are listed in the 

table of contents. Each section has a heading which clearly describes 

its content.

A copy of the EC declaration of conformity is a component of these 

operating instructions.

If a technical modification is made on the designs named there with

-

out our agreement, this declaration loses its validity.

1.2. 

Personnel qualifications

All personnel who work on or with the pump chamber must be quali-

fied to carry out this work, e.g. electrical work must be performed by 

a qualified electrician. All personnel must be of legal age.

Operating and maintenance personnel must also observe national 

accident prevention regulations.

It must be ensured that personnel have read and understood the in-

structions in this operating and maintenance handbook; if necessary, 

this manual must be ordered from the manufacturer in the required 

language.

This pump chamber is not designed to be used by persons (including 

children) with restricted physical, sensory or mental capacities, or 

those with a lack of experience and/or knowledge, unless they are 

supervised by a person responsible for their safety and have received 

instructions from that person on how the pump chamber is to be 

used.

Children must be supervised to ensure that they do not play with or 

in the pump chamber.

1.3.  Copyright

This operating and maintenance manual has been copyrighted by 

the manufacturer. The operating and maintenance manual is intend

-

ed for use by installation, operating and maintenance personnel. It 

contains specifications and drawings of a technical nature, which 

- either in whole or in part - may not be duplicated, disseminated, 

utilised without authorisation for the purposes of competition or 

distributed to third parties. The illustrations used may differ from 

the original and are intended merely as an example representation of 

the chamber.

1.4.  Subject to change

The manufacturer reserves the right to make technical modifications 

to systems or components. This operating and maintenance manual 

relates to the pump chamber specified on the title page.

1.5.  Warranty

In terms of the warranty, the current version of the "General Terms 

and Condition of Business" is applicable. You can find these here:

 

www.wilo.com/legal

Any deviations must be contractually agreed and shall then be given 

priority.

1.5.1.  General

The manufacturer has an obligation to resolve any defects on cham-

bers sold if one or more of the following apply:

• The defects are caused by the materials used or the way the product 

was manufactured or designed.

• The defects were reported in writing to the manufacturer within the 

agreed warranty period.

Содержание Wilo-Port 800





























Отзывы: