Wilo Tagus Vac, Инструкция по установке и эксплуатации

Страница: 5 / 216

11 Installation and operating instructions Tagus Vac 7-30
English
1.
General 12
1.1 About this manual 12
1.2 Other supplied documentation 12
1.3 Use of Wilo products 12
1.4 Further help and information 12
2.
Safety 12
2.1 Intended use 12
2.2 Important information 12
2.3 Signs in this manual 12
2.4 Specifications 13
2.5 Safety devices 13
2.5.1 Avoiding excessive pressure 13
2.5.2 Avoiding excessive temperature 13
2.6 Signs on the automat 13
3.
Description 14
3.1 Component overview 14
3.2 Controller SCU 16
3.3 Working principle 16
3.3.1 Deaeration 16
3.3.2 Make-up operation 17
4. Transport and storage 17
4.1 Transport 17
4.2 Storage 17
5. Installation 18
5.1 Prepare for installation 18
5.2 Ambient conditions 18
5.3 Hydraulic installation 18
5.4 Electrical installation 19
5.5 Basic electrical connections 20
6.
Startup controller 21
6.1 Controller menu structure 21
6.2 Menu symbols 21
6.3 Working principle controller 22
6.4 Controller inputs 23
7.
Maintenance and troubleshooting 24
7.1 Before maintenance 24
7.2 After a power failure 24
7.3 Maintenance interval 24
7.4 Change the automat for water treatment 24
7.5 Error messages 25
8. Disposal 27
9. Technical specifications 28
10. Commissioning 29
10.1 Commissioning Tagus Vac 7-30 29
10.2 Parameterisation for commissionning 29
11. Items of the hardware and
parameter menu 29
11.1 Operating modes 29
11.1.1 Fast/Turbo 29
11.1.2 Normal 29
11.1.3 Hand 30
11.2 Control modes 30
11.2.1 Level-controlled (%) 30
11.2.2 Pressure-controlled (P) 30
11.2.3 Filling off 30
11.3 Monitoring 30
11.3.1 Make-up quantity (monitoring) 30
11.3.2 Pressure monitoring 30
11.3.3 Monitoring of quantity of water
to be treated 31
12. Menu descriptions 31
12.1 Hardware menu 31
12.2 Parameter menu 32
12.3 Service menu 34
13.
Examples 35
13.1 Tagus Vac 7-30 in a heating system
with return flow 35
13.2 Tagus Vac 7-30 in a heating system
without return flow 35