Wilo Tagus Vac, Инструкция по установке и эксплуатации

Страница: 16 / 216

English
22 WILO 07/2018
6.3 Working principle controller
Start up
• Switch off an installed refill equipment.
Close the inflow valves.
• Switch on the controller (D).
A Display
B Error LED
C Navigation wheel
D ON/OFF switch controller
Use the navigation wheel (C) to navigate
through the menus an to confirm the input.
The display (A) shows the menus. In case of
errors the error LED (B) is on.
• Hold down the navigation wheel for two
seconds to go to the process display,
whatever the cursor position.
* Turbo = Fast
A B C D
System
-h Turbo
--- bar
p
------ Liter ---
Start
--:--
*
2 sec...
System
-h Turbo
--- bar
p
------ Liter ---
Start
--:-- Error
-h Turbo
--- bar
p
------ Liter ---
Start
--:--
*
*
A B C D
System
-h Turbo
--- bar
p
------ Liter ---
Start
--:--
*
2 sec...
System
-h Turbo
--- bar
p
------ Liter ---
Start
--:-- Error
-h Turbo
--- bar
p
------ Liter ---
Start
--:--
*
*
• In case of errors the process display
switches from [SYSTEM] to [ERROR] and the
LED is on.
• The error messages, minimum water level,
minimum pressure alarm are consistent by
the first start of operation.
• It is possible to turn the wheel to switch
between [SYSTEM] and [ERROR].
• When [ERROR] is displayed press the wheel
to go to the error list. In case of more than
one error, scroll through the errors. All errors
are shown in accordance of appearance.
• When [SYSTEM] is displayed, press the wheel
to go to the option menu.
* Turbo = Fast
A B C D
System
-h Turbo
--- bar
p
------ Liter ---
Start
--:--
*
2 sec...
System
-h Turbo
--- bar
p
------ Liter ---
Start
--:-- Error
-h Turbo
--- bar
p
------ Liter ---
Start
--:--
*
*