Wilo Tagus Vac, Инструкция по установке и эксплуатации

Страница: 26 / 216

English
32 WILO 07/2018
12.2 Parameter menu
Item Factory setting
Duration of turbo
- Remaining fast run time up to automatic change to normal mode 10 hours
Pause normal degaz
- Duration of pause between end of evacuation time and beginning of pump run 15 minutes
- Pause ON (beginning of night pause) 06:00 pm
- Pause OFF (end of night pause) 08:00 am
Degassing
- Pump run time Pressure dependent [s]
- De-aeration time 60 seconds
System pressure
- pON: depending on the system type Tagus Vac 7: 1.5 bar
Tagus Vac 10: 1.5 bar
Tagus Vac 20: 3.0 bar
Tagus Vac 30: 5.0 bar
- pOFF: depending on the system type Tagus Vac 7: 2.0 bar
Tagus Vac 10: 2.0 bar
Tagus Vac 20: 4.0 bar
Tagus Vac 30: 6.0 bar
- Lower pressure limit (lower working pressure limit) Depending on the system type
- Upper pressure limit (upper working pressure limit) Depending on the system type
- Special system pressure (irrelevant for the operator) Factory setting
Litres counter
- Litre/pulse: pulse water meter (can be set only by service personnel) 10 litre/pulse
- Error litres counter: monitoring of delay of cycle of litres counter 40 minutes
Water treatment
Treatment capacity in case of integrated water softening module 100 litres
Filling quantity:
Based on a continually referenced preceding
period of time (time window), the unit
allows using a certain number of filling
cycles that are separated by pauses from
one another. Cycles, pauses and time
windows (time spending) can be freely
parameterised.