Wilo Tagus Vac, Инструкция по установке и эксплуатации

Страница: 27 / 216

33 Installation and operating instructions Tagus Vac 7-30
English
Item Factory setting
Max. quantity/filling
- Maximum allowable quantity per cycle (also per cycle) with integrated and configured
pulse water meter.
See section Monitoring: make-up quantity
150 hours
Max. time/filling
- Maximum allowable make-up time per cycle (also per cycle).
See section Monitoring: monitoring of run time
20 minutes
Min. interval between 2 cycles
- Minimum interval between two cycles (pause) 5.0 minutes
Max. cycles/time spend
- Maximum number of cycles per time window 3
Time spending
- Size of time window 480 minutes
Item Factory setting
Time and date
Operator task
- Summer time on: starting month
(summer time ON is 00 for regions without change between times) 03
- Summer time off: ending month
(summer time OFF=00 for regions without change between times) 10
- Maintenance gap: maintenance interval 0 .. 800 days 365 days
- Pressure sensor min.value 0.0 bar
- Pressure sensor max.value 10.0 bar
Example: (default setting)
In the last 480 minutes (time spending)
the make-up water quantity per cycle
must not exceed 50 litres. Moreover, it is
not permissible to supply this quantity
during this time more than three times, and
the pauses between the cycles must be 5
minutes at a minimum.
Note that the values in the filling quantity
menu are interdependent. Therefore, it may
be necessary to first parameterise another
value before the actual value becomes
accessible within the intended limits.
Similarly, setting ranges may be limited
by the dependencies. It is advisable, for
instance, to first parameterise a sufficiently
sized time window before defining the pauses
and the number and length of cycles.