Wilo Drain-TM, Руководство пользователя

Страница: 11 / 24

User manual Wilo-Geniax Basic Control 9
Operation English
5 Operation
In normal operation, the room temperature is controlled in
accordance with the time profile stored in the Geniax cen-
tral user interface. If your daily routine should, however,
deviate from this heating sequence for a short time, you
can temporarily override the time profile via the Basic
Control and manually adjust the room temperature (inter-
vention).
Temporarily changing
room temperature Perform an intervention as described below.
•
The display shows the main display. The symbol indi-
cates the “Time profile” system status; that is, the room
will be heated in accordance with the Geniax central user
interface time profile.
1. Select the desired room target temperature with the [

]
and [

] buttons:
[

] for a higher temperature
[

] for a lower temperature
➥
The display shows the changed room target tempera-
ture. The symbol
indicates the “Intervention” sys-
tem status; that is, the preset Geniax Central Control
central user interface time profile is inactive.
The manual temperature change ends when the end
time is reached of the time area defined in the time
profile. Then the Geniax central user interface takes
over the temperature control again.
If your heating habits have significantly changed,
the time profile should be correspondingly adapted
in the Geniax central user interface so that the
heating sequence does not require constant man-
ual adjustment. Read the respective Geniax central
user interface instructions about this.
If you have already performed an “Intervention”,
the symbol
will be shown in the main display.
You can, however, change the temperature again
at any time.