Williams Sound PLA DL210NET Скачать руководство пользователя страница 18

Страница: 18 / 36

PLA DL210NET Digi-Loop™ DSP Induction Loop Amplifier

5a3. EQ

This is a 3-band parametric equalizer providing adjustment for Low, Mid-Band, and High frequency. The center or cutoff

frequency for each band is chosen under the Advanced Settings. The first screen (below) shows the level adjustment for each of

the bands (midrange highlighted). Rotate the knob until Advanced Settings is highlighted and push the knob to select. The 3rd

screen (below) shows the advanced settings, where the center or cutoff frequency for each of the bands is chosen as well as the

slope (in dB) of the cutoff.

5a4. Compression

Compression reduces the dynamic range of the input/output, making soft sounds louder and loud sounds quieter. It has

the overall effect of “volume levelling” so the entire program is more intelligible to the listener. Compression has 5 adjustable

parameters: Threshold, Ratio, Attack, Release, and Makeup Gain.

5a4a-e. Threshold, Ratio, Attack, Release, Makeup

Threshold

is the level of incoming signal at which compression takes effect. The Threshold is adjustable from -96.0dB to

0.0dB in 0.5dB steps.

Ratio

determines how much compression is applied when it takes effect. The Ratio is adjustable from 1.0:1 (no

compression) to 10.0:1 in 0.1 steps.

Attack

is the speed at which compression reacts when the input signal crosses the threshold. The Attack is adjustable from

-0ms to 500ms in 2ms steps.

Release

controls the time that the compressor continues to work after the input signal drops beneath the threshold. Short

settings release the signal quickly, while long release times have the effect of sustaining the signal. The Release is adjustable

from 0ms to 2500ms in 10ms steps.

Makeup Gain

is used to bring the overall level of the sound back up, when the overall volume has been reduced by

compression. This happens when the threshold is set low and/or the ratio has been set high. The Makeup Gain is adjustable

from 0dB to 40dB in 0.5db steps.

Содержание PLA DL210NET





































Результаты поиска

Содержание PLA DL210NET

Отзывы:

Бренды по названию

Популярные бренды

Williams Sound PLA DL210NET, Руководство пользователя

Результаты поиска

Содержание PLA DL210NET

Отзывы:

Бренды по названию

Популярные бренды