29
WIKA operating instructions, model CTH6200
EN
2146872.02 07/2021 EN/DE
6. Commissioning, operation
The following functions can be selected:
Delete all data sets
Do not delete
(cancel the process)
Clear the last data set
3. With the
[STORE/QUIT]
button, confirm the selection.
⇒
Quit the delete menu.
6.4.2 Automatic recording with adjustable cycle time (
Func-CYCL
)
The logger cycle time is adjustable (see configuration). As an example “
CYCL
=
1
:
00
” a
measuring result will be stored every minute.
Storable measuring results:
16384
Cycle time:
1 ... 3,600 s (= 1 h)
Adjustable in the configuration
A measuring result contains:
■
Measured value at that data point
Starting logger recording
1. Press the
[STORE/QUIT]
button for 2 seconds.
⇒
Recording starts automatically.
⇒
With each recording, the display will shortly show
“St.XXXX”
. XXXXX is the
number of the data set 1 ... 16384.
If the logger memory is full, the display will show:
⇒
The recording will be stopped automatically.
Stopping the logger recording
1. Press the
[STORE/QUIT]
button briefly.
⇒
A confirmation prompt appears:
2. With the
[MIN/▼]
or
[▲/MAX]
button, select the desired function.
