WIKA CTH 6200, Руководство по эксплуатации

Страница: 27 / 92

27 WIKA operating instructions, model CTH6200
EN
2146872.02 07/2021 EN/DE
6. Commissioning, operation
2. Keep pressing the [SET/MENU] button until “
SEt-CLOC
” is displayed.
3. With the [▶TARA] button, select the “
CLOC
“ parameters.
4. With the [MIN/▼] or [▲/MAX] buttons, enter the time.
5. With the [▶/TARA] button, select the “
YEAr
” parameters.
6. With the [MIN/▼] or [▲/MAX] buttons, enter the year.
7. With the [▶/TARA] button, select the “
dAtE
” parameters.
8. With the [MIN/▼] or [▲/MAX] buttons, enter the day and month.
9. With the [STORE/QUIT] button, confirm the entry.
10. Press the [SET/MENU] button.
⇒
Return to main menu.
After changing the battery, the menu for setting the clock is automatically started after
switching on the instrument.
6.4 Operation of the logger function
Generally, the instrument supports two different logger functions which one activates via
the main menu. After activating the data logger in the main menu, the arrow is shown at
'Logg' in the main display. Subsequently, recording can be started as follows:
“
Func-SToR
”
▶
Press [STORE/QUIT] button.
⇒
A measuring result is recorded in each case.
“
Func-CYCL
”
▶
Press the [STORE/QUIT] button for 2 seconds.
⇒
'
St
.
1
' will appear in the display for the first recording.
⇒
The recording is started and the measuring results will automatically be recorded
at the interval of the set cycle time.
The logger records one measuring result per data set.
This consists of the following values:
■
Current measured value
■
Date
■
Time
To evaluate the “
Func-CYCL
” data, WIKA’s GSoft (V 2.3 or higher) data logger evaluation
software must be used. The software also allows easy configuration and operation of the
logger.
When the logger function “
Func-Stor
” or “
Func-CYCL
” is activated (see menu navigation
for the main menu), the hold function is not available.