Wiener AVM16, Руководство пользователя

Страница: 15 / 33

15
0x030 jtag_csr
JTAG Control JTAG Status
0x034 jtag_data
JTAG runtest JTAG Data
reserved
0x100 cr Control/Mode Register
0x104 act
action like Master Reset
0x108 cha_inh
disable single channels, 16 Bit
0x10C cha_raw set channel to raw mode, 16 Bit
0x110 trg_level local trigger level, 12 Bit
0x114 anal_ctrl
signal analyzing control
0x118 iw_start
start of integral window, 10 Bit
0x11C iw_length length of integral window, 10 Bit
0x120 sw_start start of pulse search window, 10 Bit signed
0x124 sw_length
length of search window, 9 Bit
0x128 sw_intlength length of integral of the signal analyzing
0x12C aclk_shift step phase shift factor status
0x130-
0x13C lb_test[4] rw test register for the local bus (to 4
SPARTAN's)
reserved
0x200-
0x23C base_line[16] auto base line 12 bit
0x240-
0x27C noise_level[16] peak to peak noise
level, 5 Bit
0x280-
0x2BC q_threshold[16]
Q-Threshold for
transmitting the
integral data of the
integral window
reserved
0x400-
0x7FC data_range data, single or block
transfer
5.4.2 First group of registers (control FPGA)
ident 0x000 - Board Id. Contains firmware version number.
Bit Value Meaning
7:0 0x70
AVM16 Module Id
15:8 0x01
Firmware Version (here 0.1)
31:16 0 Reserved
serial 0x004 - User serial number. This number can be programmed by the user and is
saved in the FPGA PROMs. Read and write access possible.