Router design
Wieland Electric GmbH | BA000868 | 08/2021 (Rev. C)
18
5.6.4
SIM card reader
The SIM card reader for 3 V and 1.8 V SIM cards is located on the front panel of the router. To initiate
the router into operation it is necessary to insert an activated SIM card with unblocked PIN in the
reader. The SIM cards might be of different adjusted APN (Access Point Name).
Supported type of SIM cards: Mini SIM (2FF), dimensions 25.0 × 15.0 × 0.76 mm.
Changing the SIM card
Before handling the SIM card, turn off the router and disconnect it from power supply.
Press the small yellow button to eject the reader holder. Insert the SIM card into the reader holder
and slide it in the reader (see figure below).
Make sure that the gold contact side of the SIM card is facing up and orient yourself in the mechani-
cal slot on the upper guide grooves.
Figure 11: Ejected SIM card
CAUTION
