Router design
Wieland Electric GmbH | BA000868 | 08/2021 (Rev. C)
17
5.6.3
Antenna connector ANT
The antenna is connected to the router using the SMA connector on the front panel.
The router cannot operate without the antenna connected labeled as ANT.
ANT connector is used to connect the main antenna. For connecting the diversity antenna use the
second antenna connector DIV. The third connector (GPS) in the full version of the router is used for
additional antenna intended for GPS (router supports active GPS antenna). On user’s request, this
antenna connector can be modified to WIFI .
The antenna is connected to screw the antenna connector SMA to SMA connector on the router
head. (See figure below.)
Diversity antenna improves radio features of the router at low signal strength.
Figure 10: Connecting the antenna
CAUTION
NOTICE