3
podis CON flat cable
Wieland Electric GmbH | BA000369 (Rev. B) | 02/2016
17
Tighten both clamping screws.
Note: A training video regarding stripping of the cables and attachment of the cable end cap is available
here:
https://www.youtube.com/watch?v=oLoFVR-LJ-w
3.6
Making the connection
The modules for power feed and tap can be installed at any desired point of the flat cable. The conduc-
tors of the flat cable remain uninterrupted. The connection is made using contact screws.
Microsection of a contact point, penetration of the sheath and insulation, con-
tact with the conductor through the contact screw.
CAUTION
The flat cable is protected against polarity reversal via cod-
ing. One edge of the flat cable is V-shaped. The cable re-
ceptacles in all system components (flat cable outlets,
cable end caps) are shaped correspondingly. The flat cable
is inserted in such a manner that the V-shaped side is op-
posed to the hinge of the opened cable receptacle.
Coding/polarity reversal
protection
